Immersion Heater Element, M18 220V/3KW Water Heater 304 Stainless Steel U Shape Heating Element for Water Tanks Rice Steamer Towel Cart

Immersion Heater Element, M18 220V/3KW Water Heater U Shape Heating Element for Water Tanks Rice Steamer Towel CartDescription: 1. Material: 304 Stainless Steel 2. Diameter:12mm 3. Tube length: 220V/3KW: 295mm4. Power: 220V/3KW5. Thread: M186. Center distance: 50mm-60mm (adjustable)Note: Due to manual measurement and batch difference, there will be 0.5-1 cm error, the weight will be slightly different.

• 【Stainless steel material】: Product parameters: Material: 304 stainless steel; Pipe diameter: 12mm (0.47in); Pipe length: 295mm (11.61in); Voltage: 220V; Power: 3KW; Thread: M18; Center distance: 50mm-60mm/1.97in-2.36in (adjustable). The Immersion Water Heater Element has high power, stainless steel material, not easy to rust, dry burning, high pressure, corrosion resistance, easy installation
• 【U-shaped design】: The Immersion Heater Element adopts u-shaped design, the maximum increase in heating area, heating temperature rise fast, heating uniform, energy saving, long service life
• 【Attention】: If the water quality is poor, the surface of the water pipe is prone to scale formation, which can affect the heating effect of the water pipe. It is recommended that you regularly remove the scale or replace the water pipe.
• 【Widely Use】: The Water Heating Tube can be widely used in steam engine, hot water tank, still pot, towel car, rice steamer, insulation table, fermentation tank and other large vessels need water heating
• 【Warm Tip】: Heating pipe heating zone must be all into the water to connect the power supply, prohibit from leaving the water surface dry burning. Heating equipment with automatic water supply, after each replacement of the heating pipe need to re-adjust the ball valve to ensure that the liquid surface has always been higher than the heating pipe