WR55X24347 WR55X22867 Refrigerator Control Board from Factory Retail Box, Compatible for GE Replaces Part Numbers WR55X10996, WR55X24347,WR55X10552,WR55X10656,WR49X10060

This WR55X10942 main control board is compatible with Compatible with ge Refrigerator NEW WR55X10942,WR55X10942C Control Board WR55X10942 Control Board Replacement Part Number: AP7188100, WR55X10416, WR55X10942C, WR55X10942, WR55X10942P, WR49X10060, WR55X10024, WR55X10037, WR55X10090, WR55X10109, WR55X10187, WR55X10335, WR55X10385, WR55X10523 , WR55X10524 ,WR55X10543 , WR55X10552, WR55X10554 ,WR55X10558 , WR55X10589 ,WR55X10597 ,WR55X10614 , WR55X10616 , WR55X10626 , WR55X10656 , WR55X10659 , WR55X10722, PS2364946, AP4436216 etc. How to install WR55X10942 main control board （Search video on Iternet will also help you） STEP1: Disconnect power to the refrigerator and remove existing main board. TOOLS:1/4” nut driver,wire cutters (for some models) STEP2：Eliminate thermistor wire in pin 2 of J1 connector (see note below) if no wire in pin2, proceed to step 3.Note: This step is ONLY applicable for the following models:ALL BOTTOM FREEZER models ENCODE models with the following serial number prefixes：TD2 VD2 ZD2 AF2 DF2 FF2 GF2 HF2 LF2 MF2 RF2 SF2 STEP3: Install new main board.(1) Reconnect the electrical connectors by gently pushing the connectors onto the terminals (2) The connectors on the new board may be in a different order/place than the old board (3) When replacing back panel,make certain to capture eyelet of ground wire with back panel screw. (4) Make sure the ground wire is not pinched by the back panel and is within the enclosure. STEP4: Cut green wire in capacitor board (ONLY applicable for BOTOM FREEZER model) STEP5: Check operation.Make sure the compressor and evaporator fan turn on.Check that the temperature board is functioning.

• If your refrigerator or freezer has the following issues: it’s too hot, too cold, running too long, not running long enough? This WR55X10942 refrigerator control board is most likely the part you need to get your refrigerator running properly.
• This WR55X10942 main control board is compatible with GE, General Electric, Monogram, Café, Moffat, Profile, Sears, McClary, Hotpoint, and Kenmore models.
• Compatible with Populor models: GSH25JSRFSS,GSH25JSTASS,GSL25JFPABS,GSL25JFTABS,GSS20IEMBWW,HSM25GFRESA,HSM25GFRFSA,HSM25GFTASA,HSS25GFPAWW,HSS25GFPDWW，BSS25GFPAWW, BSS25GFPCCC, BSS25GFPCWW, BSS25GFPDCC, BSS25GFPDWW, BSS25GFPECC, BSS25GFPEWW, BSS25GFPHCC, BSS25GFPHWW and more
• Wr55x10942 Control Board Replace part number: AP7188100, WR55X10715, WR55X10942C, WR55X10942, WR55X10942P, GSHF5KGXGCWW GSH25JSXNSS HSS25GFPJWW etc .Replace WR55X10942P WR55X11130 WR55X10552 WR55X10656 WR55X10996 WR55X11072. If you are not sure, you can send us refrigerator model to help you confirm.
• Warm Tip: Please confirm if there is any problem with other accessories of the refrigerator. Because many times, the defect of another part may be misunderstood as a bad control board, because the control board has many connections, the damage of other parts （such as Refrigerator Defrost Heater Kit and Temperature Sensor) will burn the control board, causing the control board to stop working. Therefore, before replacing the board, there are many other parts in the refrigerator that need to be checked, otherwise the new control board will still stop working in a few months.