kingsea Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit with 5/8”-18UNF(3/8" Flare Inlet & Outlet), Propane Fire Pit Replacement Parts

●●●Size: Thermocouple Length: 600mm/23.62inch; Head Tip: M8; Knob Diameter 44mm; D Insert for Valve: 6.0-6.1mm ●●●CE&CSA tested Main Control Valve In & Out with 3/8 Male Flare thread (Max BTU rating: 50000, Working Pressure Max 1/2 PSI, 65 mbar) ●●●Thermocouple temperature: -200 ~ 650 Degree Celsius ●●●Time for Opening Valve: Less Than 10s Operation Instructions 1. Fix the valve on a plate or board of your grill or fire pit by the head screw and flange. 2. Connect your inlet and outlet hose on inlet and outlet side. (fix it tightly enough in case of gas leakage) 3. Fix the thermocouple nut M8 on the valve end tightly (Check if your valve end thread if 8mm before you buy) 4. Connect thermocouple and end thread well 5. Open gas by correct size knob and push your valve around 5-10s till the thermocouple head is heated enough. 6. Release your hand and it work properly If when you release hand, gas valve shut off again, please check If your thermocouple is always be heated on flame If the thermocouple end is well connected with valve If the inlet and outlet side well connect with hose you have Attention: This push button ignition kit is easy to install, the outlets igniter will generate sparks when using, please be careful when using it. Package Included: 1 Control Valve 1 Thermocouple 1 Plastic Black Knob Switch

• ✅【DEMENSION】Thermocouple Length: 600mm/23.62inch; Head Tip: M8; Knob Diameter 44mm; "D" Insert for Valve: 6.0-6.1mm
• ✅【SPECIFICATION】CE&CSA tested Main Control Valve In & Out with 3/8" Male Flare thread (Max BTU rating: 50000, Working Pressure Max 1/2 PSI, 65 mbar).
• ✅【HIGH QUALITY】The fire pit gas control valve kit are made of high quality brass material with heavy-duty construction for durable use.
• ✅【WIDE COMPATIBILITY】The propane lpg gas fire pit control safety valve kit is suitable for gas grill, heater, fire pit, fireplace if same connections. IT'S LOW PRESSURE PROPANE ONLY.
• ✅【EASY INSTALLATION】This low pressure LPG propane gas fireplace fire pit flame failure safety control valve kit is easy to install, install vertically at the opening of the device container. KIND REMINDER: Check if your valve end thread is M8 before you buy it to avoid unnecessary return. IT ONLY WORKS WITH PROPANE GAS FIRE PITS, DO NOT USE WITH NATURAL GAS FIRE PIT.