SDC Diamond Grinding Wheel 125x32x10x1.5 Tungsten Steel Alloy Saw Blade Milling Cutter Turning Tool Drill Bit(240)

SDC Diamond Grinding Wheel 125x32x10x1.5 Tungsten Steel Alloy Saw Blade Milling Cutter Turning Tool Drill Bit Specification:Material: SDC diamondOuter diameter:125mmInner hole:32mmSand width:10mmThicknes:1.5mmGrit: 150#,240#,320#,400#,600#,800#,1000#Package included:1pc grinding wheelHign-concerned Chemical : NoneUsage : Commercial ManufacturePad Material : resin

• Abrasive types: Common abrasives such as white corundum, brown corundum, silicon carbide, diamond, etc. White corundum grinding wheel is suitable for grinding quenched steel, alloy steel, etc; Brown corundum is commonly used for rough grinding of carbon steel, alloy steel, etc; Silicon carbide is suitable for grinding cast iron, non-ferrous metals, and non-metallic materials; Diamond is used for processing hard and brittle materials such as hard alloys, ceramics, etc.
• Grain size: reflects the size of abrasive particles. Coarse particle size (such as 36 # -60 #) is used for rough grinding, which removes materials quickly; Fine grained (such as 100 # -200 #) is used for precision grinding, resulting in low surface roughness of the workpiece.
• Bonding agents: including ceramic, resin, rubber, metal bonding agents, etc. Ceramic bonding agents have high hardness and good heat resistance, and are used for rough and semi fine grinding; Resin binders have good elasticity and polishing properties, and are commonly used for precision grinding and polishing; Rubber bonding agent has good flexibility and is used for thin grinding wheels, etc; Metal binders are used to make diamond and CBN grinding wheels, with strong abrasive holding ability.
• Shape and size: There are various shapes, such as parallel grinding wheels, cup-shaped grinding wheels, disc-shaped grinding wheels, etc., which need to be adapted to different processing scenarios; The size specifications are determined according to the processing requirements.
• Installation inspection: Before installation, check for cracks in the grinding wheel and lightly tap it with a wooden hammer. If the sound is abnormal, it cannot be used; Ensure firmness during installation, with the outer diameter of the two flange plates being the same and a pad added in the middle; Large sized grinding wheels need to be balanced and debugged after installation.