Broadband Signal Source wideband Signal Generator (6 GHz w/Pulse Function)

Type:WB-SG1-22/WB-SG1-20G/WB-SG1-15G/WB-SG1-9.5G/WB-SG1-6.4G Overview:1Hz-6.4G/9.5G/15GHz/20GHz/22GHz wide band output,CH2 with amplifiler adjust,OCXO inside， support extern connectfrequency stanard CH1 frequency range：1Hz-250MHz CH1 step:1Hz-19.999999MHz/1Hz,20MHz-2500MHz/10Hz CH2 output amplifiler:3.3Vpp CH1 plug type:BNC CH2 frequency range： WB-SG1-6.4G:13M-6.4G WB-SG1-9.5G:20M-9.5G WB-SG1-15G:10MHz-15GHz WB-SG1-20G:10M-20GHz WB-SG1-22G:44M-22GHz CH2 step:1Hz WB-SG1-22G CH2 with on/off modulation CH2 reference output power：+5DBM- -7dBm@1G CH2 Reference output power at each frequency point: 1G/8DBM;2G/7.3DBM;3G/8DBM;4G/8.7DBM;5G/9.9DBM; 6G/8.5DBM;7G/4.5DBM;8G/5.2DBM;9G/4.4DBM;10G/3.4DBM 11G/4.3DBM;12G/4.6DBM;13G/3.0DBM;14G/3.0DBM;15G/1.7DBM 16G/-1.4DBM;17G/-4.9DBM;18G/-6.4DBM;19G/-6.5DBM;20G/-8.3DBM CH2 output impedance:50 OHM CH2 plug type:SMA Inside frequency stadnard:10MHz Inside frequency stadnard type:OCXO Inside frequency stadnard ageing:0.5Hz/year 10M frequency output power:5dBm Extern frequency input range:0dBm to +20dBm run mode:CH1 frequency mode,CH2 frequency mode,CH1 sweep mode,CH2 sweep mode Front panel:MODE,change mode ENT:input data <>^V:left/right/up/down key CH1:channel 1 output CH2:channel 2 output Rear panel:10M REF INPUT:extern 10M input 10M REF OUTPU:10M output USB:USB port STD ADJ:inside OCXO frequency adjust Power switch dc plug Power :DC11.7-12.5V,star:less than 0.5A,stabilize:less than 0.25A Accessory: DC12V adapter 1pcs

• 1Hz-6.4G/9.5G/15GHz/20GHz/22GHz wide band output,CH2 with amplifiler adjust,OCXO inside， support extern connectfrequency stanard