Floyd Rose Floating Tremolo Set Up Blocks - Trem Wedge (Luthier Set 1/4" - 3/4")

Are you sick of string changes on your Floyd Rose taking an hour to get dialed in? Do you wish you could adjust your string height without the need to retune a dozen times while fighting to keep the bridge level with the face of the guitar? If this is you, end your frustrations now!!! Four sizes of Trem Wedge blocks allow you to lock your floating tremolo parallel with the face of your guitar while performing a setup. Whether its a simple string change or you are dialing in a complete set up, YOU NEED THIS TOOL! The four sizes of Trem Wedge blocks (from 1/4" to 3/4" thick in 1/64" steps) sit between the sustain block and the body of the guitar to allow it to be set up like a hardtail bridge. DIRECTIONS FOR USE: First, loosen the spring claw, then insert a Trem Block between the sustain block and the body of the guitar. Push the block in as far as necessary to make the bridge sit parallel to the face of the guitar. Once you have the strings tuned to pitch and dialed in, simply tighten the spring claw screws a quarter turn at a time until the block falls out. When it falls, your bridge is in perfect equilibrium and your guitar is ready to dive bomb and shriek like it was intended.

• QUIT FIGHTING YOUR FLOATING TREMOLO - These graduated blocks help you setup your Floyd Rose or Fender Stratocaster style Floating Tremolo in under 10 minutes
• QUICK AND EASY - These blocks turn your floating tremolo into a hardtail while you are tuning it and setting it up, then drop out once everything is set correctly for a true floating tremolo
• MADE FOR ALL FLOATING TREM GUITARS - Four sizes fit almost every floating tremolo configuration
• SOLID MAHOGANY - Made 100% in the U.S.A