HNZXIB Lab Autoclave, Benchtop Magnetic Stirring Reactor Autoclave, Laboratory Stirring Reactor (500ml)

Product parameters Volume(ml):100/250/500ml Pressure(Mpa):22 110V/60 Hz Tempreture(℃):350 Mixing speed(r/min):1800 Heating power(Kw):0.6 Stirring method: Magnetic Stirring Product structure 1. Stirring method: Magnetic Stirring, no leakage of the shaft seal, ensuring no leakage, no exposed rotating parts, and the test is safer. 2. Inlet gas valve: gas inlet needle valve 3. Sampling valve: It is convenient to sample and analyze the progress during the reaction. 4. Exhaust valve: It is convenient to vacuum and replace the gas before the reaction, and the reaction ends is used as a vent valve. 5. Pressure gauge: Real-time monitoring of the reaction temperature in the kettle. 6. Temperature probe: Deep into the interior of the reaction vessel and monitor the reaction temperature. 7.Heating unit: module heating, fast heating, precise control, digital display Sealing method The body and cover of the high-pressure reactor are made of high-quality stainless steel, and the body is connected with a flange through screw thread. The cover is a full-body flat cover, and both of them are tightly connected by main bolts and nuts.

• The laboratory micro magnetic stirring reactor is made of 304 stainless steel material, which is suitable for stirring inflammable and explosive chemical media and strong permeability.
• The liquid crystal display screen of the laboratory stirring reactor can display the stirring speed and temperature in real time, and the operation button can adjust the parameters, which is convenient to use, accurate in value, beautiful and practical.
• The small high-pressure reactor is equipped with pressure gauge, explosion-proof valve, intake valve, sampling valve and temperature probe, which can realize micro-reaction test conveniently. Magnetic stirrer feed after the screw symmetrical compression. Never fill the kettle more than 80% full. After the reaction is complete, the kettle body is naturally cooled to room temperature, and then the lid is opened.
• It is recommended that the external heating temperature of the high-pressure reaction device should not exceed 350 ° C, the heating rate ≤5 ° C /min, and the PID temperature control system should be used to control the cooling rate ≤5 ° C /min.
• The motor drive of the stirring tank of the laboratory high pressure reactor is connected by a magnetic couple, and the medium and the stirring parts work in a sealed state without contact transmission, which can effectively avoid mixing leakage.