NEW SCHULZ SINGLE STAGE CAST IRON AIR COMPRESSOR PUMP 2, 3 OR 5 HP + FREE FILTER

MSL-18MAX Schulz Industrial Grade Single Stage Air Compressor Pump 2HP, 3HP, 4HP And 5HP Applications. The MSL-18MAX only spins Counter-Clockwise When Viewed From the Shaft End. The MSL-18MAX is Backed by a 12 Month Warranty. The MSL-18MAX is Designed for use on Smaller 56 Frame Electric Motors Rated 2HP Through 5HP and 7HP and below Gas Engines. These Types of Electric Motors Usually Draw Between 12-21 Amps at 230V. If your motor draws more than 21 FLA at 230V or is on a frame size larger than 56HZ, this pump will not work for your application. The RPMs of the pump are between 700-1200 for best results and more longevity. The maximum flow rate for this pump is 18 CFM.

• MSL-18MAX Schulz Industrial Grade Single Stage Air Compressor Pump 2HP, 3HP, 4HP And 5HP Applications. This Pump Only Spins Counter-Clockwise When Viewed From the Shaft End.
• The MSL-18MAX is Backed by a 12 Month Warranty.
• Oil Lubricated Cast Iron 2 Cylinder Pump with 3” Pistons Rated for a Maximum Flow Rate of 18 CFM and a Maximum PSI of 140.
• Discharge Port on the Head is ½” FNPT. Air Filter Intake Port is Also ½” FNPT. The Head is Reversible for Left or Right Discharge with an Additional Kit
• Oil Sight Glass is located on the Front Side of the Pump to View Oil Levels at a Glance. Oversized Crankcase Allows for Large Oil Capacity
• 11.5” Flywheel Takes a single ½” Top Width A/4L V Belt (Belt not included)
• USA Made Air Intake is Included Along with 2 Quarts of Oil.
• Depending on Bolt Pattern, this Pump can replace numerous OEMs in the Market. The tank plate can be redrilled for allowing for bolting the pump properly so that the flywheel and motor Pulley line up.