FLYPIG 12V 150A Winch Solenoid Relay 6 Terminal 12V DC Replaces 214-1211A11 214-1211A11-06 214-1211A51 214-1211 24450 24450BX Winch Control

FLYPIG RELAY WINCH MOTOR REVERSING SOLENOID SWITCH for Permanent Magnet Winch 214-1211A11 Features: Voltage: 12 Number of Terminals: 6 Surge Amps: 150 Case Material: Plastic REPLACES: 214-1211A11 214-1231A11 214-1211A11-06 214-1211A51 214-1211A61 31-8970 LRW6001 24450 24450-BX CH24450 7-1205 Fit: Permanent Magnet Winch and Reversible Motors Four 5/16"-24 threaded studs, Two 1/4" male blade terminals, 6 Termina, 150 surge amps, 75 amps for 5 minutes. allow 5 minute cool down time after pushing solenoid to the maximum limit. For Winch Motors, Snow Plow & Spreader Motors, Windlasses, Hydraulic Pump Motors and so on. (Note: Only suitable for permanent magnet motors. Not suitable for old style motors with copper winding field) This solenoid switch is used to reverse polarity on Permanent Magnet winch motors with 2 terminal posts. It will not work on Winch motors with 3 terminal postsPackage includes: 1 * SOLENOID REVERSING POLARITY RELAY Please Note: 1.Only suitable for permanent magnet motors. Not suitable for old style motors with copper winding field. 2.This solenoid switch is used to reverse polarity on Permanent Magnet winch motors with 2 terminal posts. It will not work on Winch motors with 3 terminal posts.3.Due to the light and screen difference, the item's color may be slightly different from the pictures. 4.All dimensions are measured by hand, there may be small deviations. 5.This Is Aftermarket Replacement Item But Not Genuine. 6.All the applications indicated in this posting are for reference only, the part for sale only replace the relevant numbers. If you are not 100% sure this is what you need, please find out your engine model, series number and contact our Customer-service. NOTE:Without manual, without wire

• Four 5/16"-24 threaded studs, Two 1/4" male blade terminals, 6 Termina, 150 surge amps, 75 amps for 5 minutes. allow 5 minute cool down time after pushing solenoid to the maximum limit.
• For Winch Motors, Snow Plow & Spreader Motors, Windlasses, Hydraulic Pump Motors and so on.
• Note: Only suitable for permanent magnet motors. Not suitable for old style motors with copper winding field. This solenoid switch is used to reverse polarity on Permanent Magnet winch motors with 2 terminal posts. It will not work on Winch motors with 3 terminal posts.
• Computer tested for consistent Quality and unsurpassed reliability.
• Please compare your part against pictures to ensure this part fits your vehicle.