1pc Stainless Steel Single Sided Wet Film Applicator for Uniform Coating - 95mm Width(0.2mm)

Operation steps:→ Make sure the paint is well mixed by shaking and stirring Mark product name, lot number, type of coating device and any other information that will help to identify it in the future on test CARDS or other suitable coating substrate. Make sure the test card is fixed on the coating pad. If vacuum chuck is used, make sure that all vacuum holes on the vacuum plate are covered by the cardboard to ensure that there is enough vacuum to fix the test cardboard. Place the film applicator above the card and under the label. Finally, place a paper towel larger than the size of the paper card under the paper card, so as to absorb the excess paint spilling over the bottom of the paper card during the coating process. Place the coated substrate on a smooth, flat piece of paper (vacuum sucker is preferred) Put the film applicator on the substrate according to the clearance depth requirements Pour on the paint before the gap in the direction pulled back by the film applicator Pull back with a uniform velocity (about 25mm/ s) Immediately put the film applicator into a diluted cleaning solvent to wash with a brush, and then dry with a clean soft cloth for preservation.

• Constructed from high-grade stainless steel for exceptional durability and wear resistance, ensuring long-lasting performance.
• devised with multiple grooves to apply uniform coatings of paint, adhesives, and other similar products on flat surfaces.
• Effective coating width of 95mm and total length of 125mm, perfect for achieving precise wet film thickness.
• Compatible with water-based, acidic, and alkaline products, making it versatile for various coating applications.
• Easy to clean and maintain; simply wash with solvent and dry after use to preserve the applicator's .