Sherline Square Rigid Column Spacer 2 Inch 50058

Sherline Square Rigid Column Spacer 2 Inch 50058Square Rigid Column SpacerThis rectangular, 2? column spacer is designed to be used in conjunction with the rectangular, rigid column bases. These bases are sold separately. If you have a 4? rigid-column base you can machine right down to the top of the mill table. However, if you have an angle table, or a rotary table mounted on your machine you may want to have the 2? column spacer. This will allow for more clearance above the table while using those types of accessories. It is much easier to add the 2? column spacer than it is to switch out your 4? column base for the 6? column base. Includes extension bolt.If you are looking for a riser to use on a 5000 or 5400 series mill without a rigid column base, see P/N 1300.NOTE: The overall thickness of the spacer block is within .001? tolerance. Do not use more than one spacer at a time. As you add more spacers the stack tolerance will increase. The extra spacers can affect the rigidity and integrity of the machine.More About Rigid Column BasesThere are several column bases available from Sherline. Some of these base options include the rigid mill column bases. These bases come as a short base or tall bases. This base comes with the

• 2 Inch column spacer is designed to be used in conjunction with the rectangular Sherline rigid column bases
• Overall thickness of the spacer block is within .001? tolerance