EDM 35 ROUTER BIT SET - 1/4" inch CARBIDE BITS KIT Shank ALUMINUM CASE SAE - New

35 ROUTER BIT SET - 1/4" inch CARBIDE BITS KIT Shank ALUMINUM CASE SAE - New This comprehensive set of Tungsten Carbide tipped bits should fulfill just about all needs. These router bits can be re-sharpened as necessary. Manufactured using sealed bearings, contained within a custom made aluminum carrying case with handle and twin clasp closures. Case dimensions: 12.75 x 9 x 2.75" Router bits are in SAE measurements: - Core Box R1/8, R1/4" - 90* V Grooving 1/2" - Round Nose R1/4" - Mortising 1/2" - Dovetail 1/2, 1/4" - Straight 1/8, 1/4, 3/98, 1/2, 3/4" - Panel Pilot 1/4" - Flush Trim 3/8x1/2", 3/8x1". 1/2x1/2", 1/2x1?, 3/4x1" - 45* Chamfer 1/2" - Cove R1/4, 3/8" - Rabbeting 1/4, 5/16, 3/8" - Classical Cove R5/16" - Mave Edge R3/16" - Beading R1/2" - Double Roman R3/16", R1/4" - Roman Ogee R5/32, 1/4," - Rounder Over R1/4, 3/8, 1/2" Their equivalents in metric are: - Straight x 3.2mm/6.35mm/12.7mm/25.4mm/9.5mm/19mm - 90 V groove R3.2mm; - Core box 6.35mm; - Flush trim 9.5mm 12.7mm 19mm 45 - Chamfer 30mm - Roman ogee R4mm R6.35mm Cove 6.35mm R9.5mm - Wave edge R4.76mm - Dove tail 12.7mm 14.3mm - Mortising 12.7mm - Pound nose R6.35mm 90 - V groove 12.7mm - Panel pilot 6.35mm - Corner round R6.35mm R9.5mm R12.7mm - Slot cutter 6.35mm 7.9mm 9.5mm - Beading R12.7mm - Classical core R7.9mm - Classical R4.76mm 6.35mm