uxcell Ratchet Press Plier Crimping Tool, AWG 8-2 for 10-35mm2 Wire Terminal

1. Ratcheting wire crimping tool has efficient ratcheting mechanism and professional grade crimping for rock-solid crimps2. Wire connectors are crimped by squeezing the handle through a complete ratcheting cycle until the handle releases automatically3. Star wheel that allows adjusting crimping height to ensure the right amount of crimping force4. The handle is made of soft rubber and designed in ergonomic lever structure, which can increase friction and help you use less effort when crimpingInstructions for use:1. Strip the wire, the length of the bare wire is about 1.5mm, which is roughly equal to the crimping part of the crimping sheet.2. Put the opening of the wire crimping piece toward the wire crimping groove, and make the metal strip at the end of the wire crimping piece flush with the wire crimping pliers.3. Insert the wire into the crimping tab, align and crimp.4. Take out the crimping piece, observe the effect of crimping, and break off the metal tape at the end of the crimping piece.Specification :Crimping Range: AWG8 -2 (10-35mm²)Total Size: 230 x 74 x 20mm/9 x 2.9 x 0.79inch(L*W*H)Material: High carbon steel , TPR+PPPackage Content :1pcs x Crimping Plier

• CRIMPING - This wire terminal crimping pliers for AWG 8 -2 (10-35mm²) insulated and non-insulated ferrules
• PROFESSIONAL CRIMPING TOOL - Ratcheting wire crimping plier has efficient ratcheting mechanism and professional grade crimping for rock-solid crimps
• PRECISE RATCHETING MECHANISM – Wire connectors are crimped by squeezing the handle through a complete ratcheting cycle until the handle releases automatically
• ADJUSTABLE COMPRESSION WHEEL- Star wheel that allows to adjust crimping height to ensure the right amount of crimping force
• LABOR-SAVING DESIGN - The handle is made of soft rubber and designed in ergonomic lever structure, which can increase friction and help you use less effort when crimping