PFERD Brush Brush Braided PBG | Diameter 19 mm Shaft Diameter 6 mm Stainless Steel Wire Diameter 0.35 | 43298010 - for Straight Sanders, Drills, Bending Shafts

PFERD Brush PBG 1919/6 INOX 0.35 (1) // Aggressive working brush. Suitable for medium duty brushing work such as deburring, cleaning and rust removal. // Design: knotted // Diameter: 19 mm // Max. Diameter of the base body: 19 mm // Total length: 68 mm // Trimming length: 28 mm // Braids: 6 pieces // Trim material: stainless steel wire (INOX) // Trimming material diameter: 0.35 mm // Shank diameter: 6 mm // Suitable tool drives: straight grinder, drill, bending shaft // Maximum speed: 20,000 RPM // Optimal speed: 8.000 RPM 000-13 .000 RPM // Machinable materials: stainless steel (INOX), non-ferrous metals, aluminium, titanium, high temperature resistant materials // Processing tasks: deburring, cleaning, removing tarnishing, stripping, rust removal, descaling, removing oxide layers, welding seam processing, fillet seam processing, root seam processing. Recommended use: To control the spread of the brush, Respeed adjustable ReReReRedrives. For best performance, use tool drive with at least 500 watts. // Safety instructions: When clamping the brush, make sure that the shaft is clamped as far as possible into the holder. This is especially true for use in the high speed range. The minimum clamping length is 10 mm.

• Knotted: the braided brush brush is particularly suitable for medium-heavy brushing work such as deburring, cleaning, rust removal of hard-to-reach areas such as recesses and holes
• AGGRESSIVE: Thanks to the high stiffness of the wire braids, the braided steel brush for straight grinders and drills allows an aggressive brushing effect
• Inox: the brush with plastic-coated brush body is degreased and leaves no oil residue on the workpiece
• Economical: insert the shaft brush on speed adjustable tool drives to control the spread of the brush
• Box contents: 1 x brush brush PBG by PFERD / with diameter 19 mm, base body diameter 19 mm, stainless steel wire trim 0.35 mm, shaft diameter 6 mm / knotted