4.56 RING AND PINION GEARS & INSTALL KIT PACKAGE - DANA 30 REV FRONT / 8.25 REAR

4.56 RING AND PINION GEARS & INSTALL KIT PACKAGE4.56 RING AND PINION GEARS & INSTALL KIT PACKAGE - COMPATIBLE WITH JEEP 1991-1999 XJ CHEROKEE & WAGONEER - Includes everything required to replace your front and rear ring and pinion - Kit includes: front and rear matched ring and pinion gear sets, pinion seals, pinion nuts, ring gear bolts, pattern checking compound & brushes, thread locking compound, cover seal and shims (does not include bearings or races)*** some ratio changes may require different offset differential case which is sold separately (call or message us with your current gear ratio if you need help checking this)COMPATIBLE WITH DANA 30 REVERSE/HIGH PINION FRONT / 8.25 REARC8.25-456 D30-456F C8.25IK D30IK

• Ring and Pinion (Front) - Gear Ratio: 4.56, Ring Gear Material: 8620 Steel, Ring Gear Diameter: 7.125", Pinion Shaft Diameter: 1.375", Pinion Spline Count: 26, Ring Gear Tooth Count: 41, Pinion Gear Tooth Count: 9, Ring Gear Rotation: Reverse
• Gear Install Kit (Front) - Fits Dana 30 high pinion front differentials; includes brush, cover gasket or RTV, crush sleeve or preload shim pack, marking compound, pinion nut, pinion seal, ring gear bolts, pinion and carrier shims, and thread locking compound
• Ring and Pinion (Rear) - Gear Ratio: 4.56 | Fits Chrysler 8.25" / 8.375" (C213R/C213RE) | 41-Tooth Ring Gear / 9-Tooth Pinion | 27-Spline Pinion | 1.626" Pinion Shaft Diameter | 10-Bolt Ring Gear | 8620 Steel | Standard Rotation | Dual Drilled for 3/8" & 10mm Bolts | Requires 2.71+ Ratio Carrier & Notched Cross Pin
• Gear Install Kit (Rear) - Fits Chrysler 8.25" Rear Differential (10 Bolt); Includes Brush, Cover Gasket/RTV, Crush Sleeve or Shim Pack, Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Carrier & Pinion Shims, and Thread Locker
• Warranty Period: 1 Year or 50,000 Miles