23670-UM010 295050-1680 Common Rail Fuel Injector for IZ Engine 7FD-8FD Forklift 23670UM010 2950501680

Precision Fuel Delivery for Toyota IZ Engine ForkliftsThe 23670-UM010 = 295050-1680 common rail injector is engineered for Toyota 8FDU series diesel forklifts (models 18 through 32). This solenoid-actuated injector replaces worn or clogged units on IZ engines used in warehouse logistics, lumber yards, and container handling.Specifications- OEM cross numbers: 23670-UM010 / 295050-1680 / 23670UM010 / 2950501680- Engine family: for Toyota IZ diesel (4-cylinder common rail)- Injector type: Solenoid-controlled common rail- Coil resistance: Approx. 0.8-1.2 ohms (high impedance)- Operating pressure range: 1,350 – 1,600 bar- Sealing washer size: 20mm outer diameter- Return fitting: Standard banjo bolt (M12)Product Features- 23670-UM010 injector uses hardened nozzle needle for reduced wear- 295050-1680 common rail injector matches OEM spray angle for IZ combustion chamber- Internal slider assembly made from 440C stainless steel- Each 8FDU20 fuel injector is pressure-tested before packing- Copper sealing ring included for 23670-UM010 installationCompatible Forklift ModelsThis 295050-1680 common rail injector fits for Toyota IZ engine models:8FDU18, 8FDU20, 8FDU25, 8FDU30, 8FDU32, and 7FD series with IZ diesel.Installation Notes1. Relieve common rail pressure before removing old 23670-UM010 injector.2. Remove carbon deposits from injector bore on IZ engine cylinder head.3. Apply light oil to new sealing washer for 295050-1680 common rail injector.4. Torque clamp bolt to 25 Nm for 23670-UM010; do not overtighten.5. After mounting 8FDU25 injector, prime fuel system and check for leaks at return line.Important Precautions- Never crank engine without bleeding air after 295050-1680 injector replacement.- Do not mix 23670-UM010 injectors across different common rail generations.- Store spare common rail injectors in sealed bag to avoid nozzle corrosion.- This 295050-1680 fuel injector is not for automotive or marine use unless IZ engine matches.- Always replace all sealing washers when installing 23670-UM010 injectors on same rail.

• [🌟] Precision Spray Pattern – 23670-UM010 common rail injector delivers accurate flow rate for IZ engine forklifts. Works in warehouse loading docks or construction sites where smooth idle and reduced knock are critical during repeated lifts.
• [🌟] Cold Start Reliability – 295050-1680 fuel injector uses high impedance coil for quick solenoid response in low temperatures. This common rail injector suits for Toyota 8FDU series operating in unheated outdoor yards or cold storage facilities.
• [🌟] Wear-Resistant Internals – Stainless steel slider and spring assembly inside 23670-UM010 injector prevent carbon accumulation. 295050-1680 common rail injector maintains consistent spray over 2000+ work hours for 8FDU20 and 8FDU25 models.
• [📦] Direct-Fit Replacement – 23670-UM010 diesel injector bolts directly to IZ engine fuel rail without adapters. Each 295050-1680 common rail injector meets OE dimensions for sealing washers and return line ports on 8FDU30 and 8FDU32 forklifts.
• [⚠️] Pre-Install Fuel Prep – Clean entire fuel line before mounting 23670-UM010 injector. Always install a new diesel filter with this 295050-1680 common rail injector to prevent debris from sticking the plunger on first start.