701/45500 330262 1532371C2 50988 20500101 85804674 701/80184 Ignition Switch 9 Pins for JCB200 JCB220 Excavator Part

Product SpecificationsProduct Type: Ignition Switch (3-Position, 9-Terminal)OEM Part Numbers: 701/45500, 701/80184, 330262, 1532371C2, 50988, 20500101, 85804674, 01182528, 1182528Switch Positions: 3 (OFF - ON - START)Number of Terminals: 9Keys Included: 2 keysCompatible for JCB Models: JCB200, JCB220 Excavators; 2CX, 3CX, 4CX, 5CX, 210, 212, 214, 215, 217, MIDI CX Backhoe Loaders; Fastrac TractorsCompatible for New Holland Models: LB60, LB75, LB90, LB95, LB110, LB115, LV60, LV80, B90B, B95B, B100B, B110B, B115B, NH85TLB, U80, 555E, 575E, 655E, 675E seriesCompatible for Case IH Models: 485, 585, 685, 743, 745, 785, 844, 845, 856, 885, 955, 1055, 1056, 1255, 1455 seriesCompatible for Deutz Models: BFM1013, F2L2011 EnginesCompatible for Deutz-Fahr Models: D 6006D through D 7807 seriesPackage Contents1 x Ignition Switch (3-Position, 9-Terminal)2 x Keys🌟 Critical Pre-Purchase & Installation NotesPart Number Verification is Mandatory: This ignition switch is NOT universal. You MUST verify the part number on your existing switch before ordering. This unit replaces 701/45500, 701/80184, and the cross-referenced numbers listed above. If your old switch has a different number, confirm compatibility by comparing terminal count (9 terminals), switch positions (3 positions), and mounting configuration before purchasing.Electrical System Precautions: Always disconnect the battery negative terminal before working on any electrical components. Use a wiring diagram or label wires during removal to ensure correct reconnection. Incorrect wiring can damage the switch, starter, or other electrical components. If you are unsure of wire placement, consult your equipment's service manual or a qualified technician.Installation Warning: Professional installation by a qualified equipment technician is strongly recommended. Do not force the key or turn the switch beyond its intended positions. Ensure the switch is securely mounted to prevent rotation or loosening from vibration. After installation, test all positions before returning the equipment to service. Do not operate equipment with a malfunctioning ignition system.Key Note: The two keys included with this switch are coded to match this specific switch. They may not be compatible with other locks on your equipment (door locks, fuel cap, etc.). Keep spare keys in a safe location.

• [🌟 Direct OEM Replacement] 3-position ignition switch directly replaces JCB and compatible part numbers 701/45500, 701/80184, 330262, 1532371C2, 50988, 20500101, 85804674, 01182528, and 1182528, ensuring proper fitment for your equipment.
• [🌟 For JCB Excavators & Backhoes] Specifically compatible with JCB200 and JCB220 excavators, as well as JCB backhoe loaders including 2CX, 3CX, 4CX, 5CX, 210, 212, 214, 215, 217, MIDI CX, and Fastrac series.
• [🌟 Extensive Cross-Brand Compatibility] Also fits for New Holland (LB75, LB90, LB95, LB110, LV60, LV80, B100B, B110B), for Case IH (55, 56, 85 series tractors), for Deutz (BFM1013, F2L2011 engines), and for Deutz-Fahr (D 6006-7807 series) equipment.
• [🌟 9-Terminal Configuration] Features 9 terminals with 3 operating positions (OFF, ON, START), providing complete control for the electrical system, including glow plug pre-heat, accessory power, and starter engagement.
• [🌟 Complete with Two Keys] Ignition switch includes two keys, allowing for a spare or backup, and features standard key coding compatible with original equipment locks.