10000 CPS Hot Melt Glue Dispenser, 800W Adhesive Dispenser Equipment Hot Melt Glue Spraying Gluing Machine with Pedal Switch & Pressure Gauge Epoxy Resin Gluing Machine for Factories, Workshops

ApplicationThis product can be widely used in manufacturing plants, workshops, construction sites, and stores for shoemaking, DIY design, and other manual or semi-automatic products that need glue.Preparation for Operation:1.Confirm the safety protection measures.2.Check if the machine is 110VAC and make sure that the pressure will not fluctuate.3.See if the temperature of the plastic bucket is set at about 302°F(different hot melt adhesives have different softening points. For specific setting values, refer to the data provided by the hot melt adhesive supplier).4.Check whether the foot switch is connected and whether any conductive objects have touched the components in the electric control box.5.Check if the air supply system is basically dry and the air pressure is stable6.Power on and test the circuit of each part.Boot Steps:1.Connect the power and turn the power switch to “ON”.2.Check if the temperature of the temperature controller is within the above range.3.Check whether the pressure relief is turned in the direction of pressure holding.4.Connect the origin, set the pressure value, and start the operation.Shutdown Steps:1. Release the foot switch to cut off the main power2. Disconnect the air pipe, or adjust the pressure regulating valve of the filter cup to 0.SpecificationMaterial: Iron and AluminumSurface Treatment: Painted, Sprayed with TeflonMount Type: CountertopVoltage: 110V 10APlug Model: PSB-10Max Power: 1250WMax Voltage: 10A 125VSol Speed: 3kg/h, 6.61lbs/hSolvent Capacity: 3kg/h, 6.61lbs/hMaximum Viscosity: 10000 CPSPower: 800WWorking Temperature: Over 150°C/302°FTemperature Control Range: 150-200°C/302-392℉Pressure Range: 4~10kg/8.82~22.05lbsLength of Power Cord: About 2m/6.56ftPackage Included1* Hot Melt Glue Dispenser1* Pedal Switch1* Conversion Plug1* Pressure GaugeNotesPlease note that this product needs to be used with an air compressor, so you need to prepare it in advance.

• 【High Efficiency Dispenser】800W power, 6.61lbs/h sol speed and solvent capacity, and 10000CPS maximum viscosity can improve your work efficiency, save labor and cost.
• 【Multiple Functions】It is mainly used for gluing in product processes, as well as other liquid precise points, injection, and application to the exact position of each product, and can be used for dotting, marking, circular or arcing.
• 【Safety Guard】The uniform heat dissipation holes, pressure retaining design, and over-temperature protection function can timely reduce the temperature of the product during operation, avoid potential safety hazards, and extend the service life of the product.
• 【Adjustable Design】The temperature can be adjusted in the range of 302-392℉, and the pressure can be adjusted in the range of 8.82-22.05lbs, which are very convenient and conducive to making more beautiful and standardized items.
• 【Simple Installation and Operation】The simple structure, convenient switches, practical pedal, clear pressure gauge and indication, and two models(manual and automatic) allow you to complete the installation and accurately control the amount of glue and free up your hands.